HVAC Condensation Lines Can Cause Water Damage

5/26/2022 (Permalink)

High temps mean more condensation from your HVAC which means you can have a problem if not watched closely.

When your HVAC creates condensation, that water needs somewhere to go, and those lines can become clogged quickly. This can cause your emergency line to either break or your drop pan to overfill, and that water needs somewhere to go! So, what should you do if this happens causing water damage?

• Call an HVAC company to service your unit. This is probably the easiest and most efficient method, but unfortunately the most expensive.
• Check to make sure your primary condensation line, usually located near the ground outside the home in an area of high foot traffic, is slowly dripping water when your HVAC is on.
• If your primary line is not dripping check the secondary line, usually located somewhere like above a window or door as to be more noticeable when dripping.
• If the primary, or both lines, are not dripping while the unit is on, find a way to flush out or remove the potential blockage. The cleanout will usually be located close to the HVAC main unit. Make sure you thoroughly research how to properly clear your lines before attempting to!
• Check your HVAC unit drip pan, make sure it has no holes or rust around it. If it is damaged, you may need to have it replaced.

SERVPRO^® of Washington County will come out and perform a free moisture inspection on your Washington County, TN residence or commercial property if you believe you may have had a potential accident. We get an estimate to you or begin communication with your insurance. If your HVAC system is leaking or backing up, call SERVPRO^® of Washington County at 423-434-0046.