How To Prevent Mold With Timely Mitigation

11/26/2018 (Permalink)

Cleaning up after a water loss in a Gladstone,TN building

Water Damage can Become Mold Damage

Having water damage in your commercial property in Gladstone, TN, is bad enough, but if left unchecked, that damage can become a breeding ground for mold. The only way to prevent that from happening is to fix the problem as soon as possible. Water restoration experts help by drying, cleaning and replacing materials that are affected by leaks and high humidity.

1. Dry

The first thing that technicians do to prevent mold growth is to dry out the affected areas. Mold can start to gather in as little as 24 hours from the time the moisture level gets too high. All excess water is siphoned off, and then surfaces must be dried. Technicians use specialized equipment to expedite this process so that mold doesn't have a chance to take hold.

2. Clean

When you have water damage, the area it covers will probably need to be disinfected after it is dry. Even if the leak comes from a pipe, it is likely to pick up contaminants as it soaks through the floor, insulation or ceiling, turning it into Category 2 water. Specialists can test the surfaces for traces of bacteria and other microbes to ensure that the space is left clean.

3. Replace

Ideally, technicians can get to the affected area in time to ensure not only mold prevention but also structure maintenance. Occasionally, however, the damage is too extensive to salvage the flooring, walls or ceiling saturated by the water. When that happens, the portion that had to be removed must be replaced. Then, the tile, paint or other aesthetic elements must be blended so that it matches the surrounding surfaces.

Fixing water damage quickly helps get your building back in order, but it also helps to prevent secondary damage such as mold growth. By calling for professional repair as soon as you notice the problem, you can protect your building from further problems.